본문 바로가기

Gas & Liquid Control Technology with DRASTAR

Products

NPT Pressure Gauge

NPT Pressure Gauge (1/4" A type)

59fc236fbbb94.jpg

  Products Feature

Pressure Gauge for NPT male 1/4" “A” type

Gauge S0000 시리즈 또는 B0000 시리즈는 모든 가스에 안전하고 편리하게 사용할 수 있도록 개발된 가스 레귤레이터 전용 압력계 시리즈입니다.

특히, 클린(Clean) 질소를 이용하여 캘리브레이션 (Calibration) 하였기 때문에 어떠한 가스를 사용하여도 화학적 반응 없이 안전하게 사용할 수 있습니다.

NPT Male타입의 제품으로, 내부의 모든 부품은 Stainless Steel 304 or 316L and Brass로 이루어져 있습니다. 사용압력은 0 ~ 30psig(약 2bar) ~ 최대 6000psig(약 420bar)까지 사용할 수 있습니다. NPT타입(DRA-S0000) 게이지 시리즈는 조립, 실험의 모든 공정은 크린룸에서 모든 작업이 이루어집니다.

※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils.

  Ordering Information.

DRA - S 0030
BASIC SERIES NUMBER
BODY MATERIAL PRESSURE RANGE

1/4" type
Pressure Gauge
50mm (2")
B = Brass (NPT)

S = STS 316L(NPT)


0030L = 30 L/min
0030 = 30psig(2.1bar)
0060 = 60psig(4.2bar)
0100 = 100psig(7bar)
0200 = 200psig(14bar)
0300 = 300psig(21bar)
0600 = 600psig(42bar)
1000 = 1000psig(70bar)
2000 = 2000psig(140bar)
3000 = 3000psig(210bar)
4000 = 4000psig(270bar)
6000 = 6000psig(420bar)
10000 = 10000psig(700bar)
 

  Specification

 Type

 DRA-B0000  1/4"  Male NPT
 DRA-S0000  1/4"  Male NPT 

 Nominal Diameter

 50mm (2")

 Accuracy

 DRA-B0000  3.0%
 DRA-S0000  1.5%

 Leak Rate Certification

 NPT type to 2 x 10 -6 atm cc/sec Helium available.

 Body Materials

 DRA-B0000   Nickel Plated Brass
 DRA-S0000   Stainless steel 304 or 316L 

 Bonnet Material

 DRA-B0000   Nickel Plated Brass
 DRA-S0000   Stainless steel 304 or 316 

 Pressure Ranges

 DRA-B0030L = 30 L/min
 DRA-x0030  0 ~ 30psig(2bar)
 DRA-x0060  0 ~ 60psig(4.2bar)
 DRA-x0100  0 ~ 100psig(7bar)
 DRA-x0200  0 ~ 200psig(14bar)
 DRA-x0300  0 ~ 300psig(21bar)
 DRA-x0600  0 ~ 600psig(42bar)
 DRA-x1000  0 ~ 1000psig(70bar)
 DRA-x2000  0 ~ 2000psig(140bar)
 DRA-x3000  0 ~ 3000psig(210bar)
 DRA-x4000  0 ~ 4000psig(270bar)
 DRA-x6000  0 ~ 6000psig(420bar)

 Operating Temperature

 -40°C ~ +70°C (-40°F ~ +165°F)   Standard
 Medium : +100°C   maximum

 

    Recommendations


Each product is manufactured since being taken into consideration of the best safety and easy manipulation. However in order to use the regulator in most safe and effective way, you are recommended to use the actual pressure within the range of its 35% ~ 65%. For making precise, smooth movement and to prolong product life, strongly recommended to make a use within above mentioned range.